Surround Leveler reads the speaker layout Windows reports for your device — stereo, quad, 5.1, 7.1, 7.1.4 — and shows it as a map you can rearrange to match where the speakers really are in your room. Pick a speaker and play calibrated pink noise (−20 dBFS RMS, the calibration standard), band-limited pink noise, white noise or a sine sweep, with the LFE channel optionally low-passed.
Put a microphone at your listening position and the Level Wizard does the rest: it plays each speaker in turn, measures it, and sets its level until they all match. Prefer an SPL meter? Auto-cycle steps through the speakers while you turn each knob. Levels are set in Voicemeeter's per-channel bus EQ (Banana or Potato), or in Windows' own per-channel volume for ordinary devices, so they stay applied without the app running.
It's careful about the mic: it opens it in raw mode to bypass Windows' sound processing, switches off driver auto-gain where it can, and refuses to trust measurements that look like noise suppression or echo cancellation at work — re-measuring rather than giving you bad levels. Save and load complete level sets as files.
Follows Windows' layout (up to 7.1.4); drag speakers to where they sit in your room.
Pink noise (full and 500 Hz–2 kHz), white noise and sines at −20 dBFS RMS, with an LFE low-pass.
Measures each speaker with a mic at the listening position and evens them out.
Auto-cycle through speakers and set each knob by hand to a target like 75 dB SPL.
See what the mic hears in the middle of the speaker map, with calibration-file correction.
Detects auto-gain, noise suppression and echo cancellation so bad readings never become bad levels.
Levels live in Voicemeeter or Windows itself; save/load level sets as files.